Installation Instructions for Air Cleaner Main and Pre-element Replacement for 14HP Engine Compatible with RN EX35 EX40

Tools Required:

1. Socket Wrench Set – For removing and tightening bolts.
2. Phillips Screwdriver – To remove any screws that may secure the air cleaner assembly.
3. Flathead Screwdriver – Useful for prying open clips or securing certain components.
4. Clean Cloth – For cleaning surfaces before installing the new components.
5. Optional: Torque Wrench – To ensure bolts are tightened to manufacturer specifications (if applicable).

Installation Steps:

1. Preparation

   • Ensure that the engine is turned off and completely cool before beginning the installation process.
   • Gather all necessary tools and the replacement air cleaner components.

2. Remove the Old Air Cleaner

   • Locate the air cleaner assembly on your engine.
   • Use the socket wrench or screwdriver to remove any bolts or screws holding the assembly in place.
   • Carefully detach the old air cleaner main element and pre-element.

3. Clean the Area

   • Use a clean cloth to wipe down the surfaces where the air cleaner was attached, ensuring there is no dirt or debris.

4. Install the New Components

   • Position the new pre-element in place, followed by the main air cleaner element. Ensure that both components are seated securely.
   • Reattach the air cleaner assembly by aligning it properly and securing it with the original bolts or screws previously removed.

5. Final Checks

   • Double-check that all fasteners are tightened and the air cleaner is securely in place.
   • Start the engine and ensure it runs smoothly without any abnormal noises.

6. Maintenance Reminder

   • Regularly check and replace the air cleaner components as recommended to maintain optimal engine performance.

Thank you for choosing our air cleaner replacement components for your 14HP engine. Enjoy improved performance and efficiency!