Installation Instructions for the Motorcycle Left and Right Pedal Assembly for SO-CO Scooter TC TS

Product Overview:
The Motorcycle Left and Right Pedal Assembly is designed specifically for the SO-CO Scooter TC TS models. This assembly ensures perfect fit and smooth operation, enhancing your riding experience with improved control and increased safety for both daily use and long-distance rides.

Tools Required:
Before you begin the installation process, please ensure you have the following tools available:

1. Wrench Set - For tightening and loosening bolts.
2. Screwdriver Set - Both flathead and Phillips screwdrivers may be needed.
3. Allen Wrench - For hex screws, if applicable.
4. Pliers - To hold and manipulate small parts.
5. Torque Wrench - To ensure bolts are tightened to the manufacturer’s recommended torque settings.
6. Cleaning Cloth - To wipe down surfaces and parts as needed.

Installation Steps:

1. Preparation:

   • Lay out all components and ensure you have all parts as per the assembly guide.
   • Clean the area where the pedal assembly will be attached to avoid any dirt interfering with the installation.

2. Removing Old Assembly:

   • Carefully remove the existing left and right pedal components if applicable, using the wrench set to detach any screws or bolts.
   • Safely store the old parts for future reference.

3. Attaching New Pedal Assembly:

   • Position the left and right pedal assemblies into place, ensuring they are properly aligned with the mounting brackets.
   • Secure each assembly using the provided bolts and screws. Use the appropriate wrench or Allen wrench to tighten as needed.

4. Final Tightening:

   • Once all screws and bolts are in place, use a torque wrench to tighten them to the specified settings to ensure durability and safety during use.

5. Final Check:

   • Inspect the installation for any loose parts or misalignments.
   • Check that the pedals operate smoothly, and there are no obstructions.

6. Testing:

   • Once installed, take the scooter for a short test ride to ensure that the pedals function correctly and enhance your riding experience.

Maintenance Tips:

• Regularly check the pedal assembly for wear and tear, and tighten any loose components to ensure safety.
• Clean the pedal area periodically to maintain performance.

Disclaimer:
Always refer to the manufacturer’s instructions for your specific scooter model. If unsure about installation, consult with a professional. Enjoy enhanced performance and safety with your new pedal assembly!