Product Installation Instructions for 37x47x11 Fork Oil Seal Dust Cover

Overview:
The 37x47x11 Fork Oil Seal Dust Cover is designed specifically for Adventure models from 2012 to 2017. This replacement part ensures a perfect fit and enhances the performance of your fork suspension system while extending its lifespan.

Tools Required:
To install the Fork Oil Seal Dust Cover, you will need the following tools:

1. Flathead Screwdriver – To carefully remove the old dust cover.
2. Phillips Head Screwdriver – To help with any screws or fasteners in the area.
3. Pliers – Useful for gripping and pulling the old seal out if it's stuck.
4. Seal Installer Tool or PVC Pipe (optional) – For easier installation of the new dust cover, you may use a seal installer tool or a piece of PVC pipe that matches the size of the new seal.
5. Grease – To lubricate the new dust cover before installation.
6. Rags or Shop Towels – For cleaning the area and wiping off any excess grease.

Installation Steps:

1. Prepare Your Workspace:

   • Ensure your motorcycle is on a flat surface and securely supported.
   • Gather all your tools and lay them out for easy access.

2. Remove the Old Dust Cover:

   • Use the flathead screwdriver to gently pry off the old dust cover.
   • Be careful to avoid damaging the fork or other components.
   • If it's stuck, use pliers to grip and pull it off.

3. Clean the Area:

   • Wipe down the fork area where the dust cover sits using rags or shop towels to ensure a clean surface for the new seal.

4. Lubricate the New Dust Cover:

   • Apply a thin layer of grease to the outer edge of the new dust cover. This helps with installation and extends its life.

5. Install the New Dust Cover:

   • Align the new dust cover with the fork and gently press it into place.
   • If needed, use the seal installer tool or PVC pipe to evenly distribute the pressure and ensure a snug fit.

6. Check Installation:

   • Ensure the new dust cover is seated correctly and there are no gaps.

7. Final Cleaning:

   • Wipe away any excess grease and ensure the work area is tidy.

Conclusion:
With the new 37x47x11 Fork Oil Seal Dust Cover installed, your motorcycle's fork suspension system will benefit from improved performance and longevity. Enjoy a smoother and more comfortable ride!

Note:
If you are not confident in performing this installation, consider seeking assistance from a professional mechanic.