Here is a product installation manual for the Automatic Electric Choke for Scooter Moped ATV Go Kart 50cc 125cc 150cc GY6 Carburetor:

Installation Manual

Tools Required:

• Screwdriver (flathead and Phillips)
• Socket wrench or ratchet and socket (for 10mm and 12mm bolts)
• Pliers
• Wire strippers (if your choke has a wire harness)
• Torx screwdriver (if your choke has Torx screws)

Important:

• Before starting the installation, make sure you have read and understood the instructions carefully.
• Make sure the vehicle is in a well-ventilated area and the engine is cool.
• Wear protective gloves and safety glasses to avoid injury.

Step 1: Remove the Old Choke

1. Locate the old choke on your vehicle. It is usually located near the carburetor.
2. Use a screwdriver to remove the screws that hold the old choke in place.
3. Gently pull the old choke away from the carburetor.
4. Disconnect the wire harness from the old choke (if applicable).

Step 2: Prepare the New Choke

1. Take the new Automatic Electric Choke and locate the mounting bracket.
2. Identify the holes on the bracket that match the holes on your vehicle's carburetor.
3. Use a screwdriver to attach the mounting bracket to the carburetor using the provided screws.

Step 3: Connect the Wiring

1. Locate the wiring harness on the new choke.
2. Connect the wiring harness to the corresponding terminals on your vehicle's ignition system (usually located near the ignition coil).
3. Make sure all connections are secure and not loose.

Step 4: Install the New Choke

1. Place the new choke over the mounting bracket, ensuring it is securely attached to the carburetor.
2. Use a screwdriver to tighten the screws that hold the new choke in place.
3. Make sure the choke is properly aligned with the carburetor.

Step 5: Test the New Choke

1. Turn on the ignition and start the engine.
2. Check if the engine starts smoothly and runs smoothly without any issues.
3. If everything is working correctly, you can adjust the choke as needed.

Tips and Warnings:

• Make sure to follow all safety precautions when working with electrical systems.
• If you are not comfortable with this installation, consider seeking help from a professional mechanic.
• This product is designed for 50cc, 125cc, and 150cc GY6 engines only. Using it on other engines may void the warranty and cause damage to your vehicle.