Installation Instructions for Durable Throttle Body for Chrysler and Dodge Models (2008-2015 1.8, 2.0, 2.4)

Introduction:
This throttle body is designed to provide reliable performance and precise air flow control for Chrysler and Dodge vehicles produced between 2008 and 2015. With compatibility for engine types 1.8, 2.0, and 2.4, it is an excellent replacement part for OE numbers 5429090, 04891735AC, 04891735AD, and 04891735AB.

Tools Required:
Before you begin the installation process, ensure you have the following tools at your disposal:

1. Socket Wrench Set: To remove and install mounting bolts.
2. Torque Wrench: To ensure bolts are tightened to the manufacturer’s specifications.
3. Screwdrivers: Both flathead and Phillips head screwdrivers for various clips and connectors.
4. Pliers: For any stubborn clips or connectors.
5. Ratcheting Wrench: For easier access to tight spaces.
6. Gasket Scraper or Razor Blade: To remove old gasket material.
7. Shop Towels or Rags: For cleanup and to catch any spills.
8. Safety Glasses and Gloves: To protect yourself during installation.

Installation Steps:

1. Prepare the Vehicle:

   • Ensure the engine is cool and disconnect the battery.
   • Secure the vehicle on a level surface.

2. Remove the Old Throttle Body:

   • Locate the throttle body in the engine compartment.
   • Disconnect any electrical connectors and vacuum lines attached to the throttle body.
   • Remove the mounting bolts using the socket wrench and carefully take off the old throttle body.

3. Clean the Mounting Surface:

   • Use a gasket scraper or razor blade to remove any old gasket material from the intake manifold.
   • Clean the area thoroughly with shop towels to ensure a good seal with the new throttle body.

4. Install the New Throttle Body:

   • Place the new throttle body onto the intake manifold.
   • Install the mounting bolts and tighten them in a crisscross pattern, using a torque wrench to meet specification.
   • Reconnect all electrical connectors and vacuum lines, ensuring they are secure.

5. Reconnect the Battery:

   • Once everything is reassembled, reconnect the battery.

6. Test the Installation:

   • Start the engine and let it idle. Check for any irregularities or leaks.
   • Take the vehicle for a test drive to ensure proper functioning of the throttle body and overall engine performance.

Conclusion:
After following these steps, your new throttle body should be successfully installed, improving engine responsiveness and optimizing fuel efficiency. If you encounter any difficulties or have questions, consult a professional mechanic for assistance.

Thank you for choosing our Durable Throttle Body!