Installation Instructions for Motorcycle Foam Air Intake Cleaner

Required Tools:

• A screwdriver (preferably a Torx or hex key)
• A soft brush or cloth for cleaning
• A container or sink for washing the air filter
  *Water
• Mild soap or air filter cleaner (optional)

Step-by-Step Installation:

1. Locate the Air Filter: Find the air filter housing on your motorcycle, usually located on the right side of the bike or in the engine compartment.
2. Remove the Air Filter Housing: Use a screwdriver to remove the screws or clips holding the air filter housing in place. Gently pull the housing away from the bike.
3. Remove the Old Air Filter: Take out the old air filter from the housing. If it's a foam air filter, gently pull it out.
4. Clean the Air Filter Housing: Use a soft brush or cloth to remove any dirt or debris from the air filter housing.
5. Soak and Clean the Old Air Filter: If the old air filter is dirty, soak it in a container or sink with water and mild soap or air filter cleaner. Let it soak for a few minutes, then use a soft brush or cloth to clean it.
6. Rinse and Dry the Air Filter: Rinse the cleaned air filter with clean water and let it air dry completely before reinstalling.
7. Install the New Air Filter Cleaner: If you're using a new air filter cleaner, follow the manufacturer's instructions for installation.
8. Reinstall the Air Filter Housing: Put the air filter back in the housing, making sure it's properly seated.
9. Reattach the Air Filter Housing: Use screws or clips to secure the air filter housing in place.

Tips:

• Make sure to check your owner's manual for specific instructions on how to remove and install your air filter housing.
• If you're not comfortable with DIY repairs, consider consulting a professional mechanic.
• Regularly cleaning and replacing your air filter can help improve your motorcycle's performance and extend its lifespan.