Product Installation Instructions for 65mm Metal Rim Grip Rubber Tires

Tools Required:

1. Phillips screwdriver
2. Flathead screwdriver (optional for tire removal)
3. Small wrench or pliers (to tighten screws if needed)
4. Work surface or mat (to protect your vehicle during installation)

Installation Steps:

1. Preparation:

   • Ensure that your remote control car is turned off to avoid any accidents during the installation process.
   • Place your car on a stable work surface or mat to protect it while you work.

2. Remove Existing Tires:

   • Using the Phillips screwdriver, locate and unscrew the existing tires from the metal rims.
   • Gently remove the old tires from the rims. If they are tightly fitted, you may use a flathead screwdriver to help pry them off carefully.

3. Prepare New Tires:

   • Take the new 65mm Metal Rim Grip Rubber Tires out of the packaging.
   • Inspect the tires for any damages before proceeding with the installation.

4. Install New Tires:
   -Align the new rubber tires with the metal rims, ensuring they fit snugly.

   • Press the tires onto the rims firmly until they are securely in place.
   • Use the Phillips screwdriver to attach the screws back into place, ensuring they are tightened sufficiently.

5. Check Installation:

   • Once all tires are installed, give each tire a gentle pull to ensure they are properly seated on the rims.
   • If necessary, use a wrench or pliers to tighten any loose screws.

6. Final Steps:

   • Power on your remote control car and perform a test drive to ensure everything is functioning correctly.
   • Enjoy enhanced performance with your new tires!

Note: Always refer to the individual instructions provided for your specific model (144001, 144002, 124016, 124017, 124019, or 124018) to ensure compatibility and proper installation.