Product Installation Instructions for Car Headlight Wiper

Compatible Models:

• V 960 (1995-1997)
  -S90
• V90 (1997-1998)
• S80 (1999-2006)

Installation Tools Needed:

• Flathead screwdriver
• Phillips screwdriver
• Pliers (optional)
  -Clean cloth

Installation Steps:

1. Preparation:
   Ensure your vehicle is parked on a flat surface and the engine is turned off. Gather all the tools you will need for installation.

2. Remove Old Wiper:

   • Use the flathead screwdriver to gently pry off the old wiper from the mounting bracket.
   • If necessary, use pliers to grip and pull the wiper off.

3. Clean the Area:

   • Use a clean cloth to wipe down the area around the headlight and the wiper mounting point.
   • This will ensure that no dirt or debris interferes with the new wiper's performance.

4. Install New Wiper:
   -Align the new headlight wiper with the mounting bracket.

   • Push the wiper onto the bracket until it clicks into place.

5. Test the Wiper:

   • Turn on your vehicle and activate the wiper system to ensure that the new wiper is functioning correctly.
   • Check if it smoothly removes dirt and water from the headlights.

6. Final Inspection:

   • Inspect the installation to make sure everything is secure and in place.
   • Ensure that all tools are removed from the workspace.

Safety Tips:

• Always wear safety goggles when working with tools.
• Consult your vehicle’s manual for any specific instructions related to your model.

By following these instructions, you’ll efficiently replace your vehicle’s headlight wiper, enhancing the cleaning efficiency and improving nighttime visibility for safer driving.