Installation Instructions for Dual-Stage Foam Air Filter for Motorcycle Models BE-TA RR RS 2T 4T 7T 125 250 300 350 390 400 430 480 490 498 500 525 X-Trainer

Tools Required:

1. Screwdriver Set: A flathead and Phillips screwdriver are essential for removing and securing filter housing screws.

2. Socket Wrench Set: A set of socket wrenches may be needed to remove bolts on certain models.

3. Pliers: Useful for gripping and pulling components as necessary.

4. Cleaning Supplies: Mild soap or cleaner for cleaning the old filter and surrounding areas.

5. Spray Oil: Recommended for lubricating the new air filter if necessary, depending on the manufacturer's recommendations.

6. Clean Cloth or Rag: For wiping down surfaces and removing dust or debris.

7. Dust Mask: Recommended for personal protection while cleaning.

Installation Steps:

1. Preparation:

   • Ensure the motorcycle is parked on a stable surface and the engine is cool.
   • Gather all the required tools before beginning the installation.

2. Remove the Old Air Filter:

   • Use the screwdriver to remove the screws or bolts holding the air filter cover in place.
   • Carefully take off the cover and set it aside.
   • Remove the old air filter, taking note of how it is positioned for proper installation of the new filter.

3. Clean the Air Filter Housing:

   • Use the cleaning supplies to clean the inside of the air filter housing. Make sure to remove any dust or debris.

4. Install the New Dual-Stage Foam Air Filter:

   • Position the new air filter in the same orientation as the old one. Ensure it fits snugly in place.
   • Replace the air filter cover and secure it with screws or bolts using the screwdriver or socket wrench.

5. Final Checks:

   • Make sure all screws and bolts are tightened properly to ensure there are no air leaks.
   • Check that the air filter is seated correctly to optimize performance.

6. Maintenance:

   • Periodically remove and clean the air filter as needed to maintain optimal performance. Follow the manufacturer's instructions for cleaning and re-oiling, if applicable.

Note: Always refer to your motorcycle's user manual for specific instructions and precautions related to your model.