Product Installation Instructions for Brake Pad Set for 650 EX 2017-2022

Overview:
This Brake Pad Set is designed specifically for the 650 EX models from 2017 to 2022, providing outstanding braking performance and enhancing your riding safety.

Tools Required:
Before starting the installation process, please gather the following tools:

1. Socket Wrench Set - A variety of socket sizes will be required to remove the caliper bolts.
2. Torque Wrench - To ensure that bolts are tightened to the manufacturer’s recommended specifications.
3. Pliers - Useful for removing any retaining clips or pins.
4. Brake Cleaner - To clean the brake components before installation.
5. Flathead Screwdriver - For prying any retaining clips if necessary.
6. Jack and Jack Stands - To lift and secure your vehicle safely while working.
7. Rags or Paper Towels - For cleaning and maintenance.
8. Safety Glasses and Gloves - To protect your eyes and hands during installation.

Installation Steps:

1. Safety First: Begin by ensuring the bike is on a flat surface. Use the jack to lift the bike and secure it with jack stands.

2. Remove the Wheel:

   • Use the socket wrench to remove the bolts securing the front or rear wheel.
   • Carefully take the wheel off and set it aside.

3. Remove the Brake Caliper:

   • Using the socket wrench, remove the caliper bolts.
   • Gently slide the caliper off the rotor. Do not let the caliper hang by the brake line.

4. Remove Old Brake Pads:

   • Take out the old brake pads from the caliper. You may need to use pliers to remove any retaining clips.
   • Clean the caliper with brake cleaner to remove dust and debris.

5. Install New Brake Pads:

   • Position the new brake pads into the caliper, ensuring they are correctly aligned.
   • Reinsert any retaining clips to secure the pads in place.

6. Reattach the Brake Caliper:

   • Carefully slide the caliper back onto the rotor and secure it with the caliper bolts. Use a torque wrench to tighten to the manufacturer’s specified torque settings.

7. Reinstall the Wheel:

   • Place the wheel back onto the axle and secure it with the wheel bolts using the socket wrench.

8. Test the Brakes:

   • Before riding, gently pump the brake lever to ensure the pads are seated correctly against the rotor.
   • Check for any unusual noises or issues.

9. Final Inspection:

   • Ensure all bolts are tightened and that there are no loose parts.

Conclusion:
You have now successfully installed the brake pad set for your 650 EX 2017-2022 model. Enjoy your improved stopping power and an enhanced riding experience! If you have any doubts or concerns during the process, please consult a professional mechanic.