Product Installation Instructions for Outer Door Handle Assembly Compatible with Hyundai Tucson 2004-2009

Tools Required:

1. Flathead screwdriver
2. Phillips screwdriver
3. Socket wrench set (10mm)
4. Trim removal tool (optional)
   5.Clean cloth or rag

Installation Steps:

1. Preparation:

   • Park your vehicle on a flat surface and turn off the ignition.
   • Open the door for which you are replacing the handle.
   • Use the clean cloth to cover the area around the door handle to prevent scratches.

2. Removing the Old Door Handle:

   • Locate the screws securing the door handle. Use the Phillips screwdriver to remove them.
   • If applicable, use the trim removal tool to gently pry off any trim pieces around the handle.
   • Carefully pull the old handle away from the door to access the internal mechanism.
   • Disconnect any wiring harness if your model has electrical features.

3. Installing the New Door Handle:

   • Take the new Outer Door Handle Assembly and align it with the mounting holes.
   • If there are any electrical connections, reconnect the wiring harness securely.
   • Push the handle into place and ensure it fits snugly against the door.

4. Securing the Handle:

   • Insert the screws you previously removed and tighten them with the Phillips screwdriver.
   • If you removed any trim pieces, reinstall them carefully.

5. Final Checks:

   • Test the new handle by pulling and pushing to ensure it operates smoothly.
   • Check that the door closes securely and the handle looks flush against the door.

6. Clean Up:

   • Remove any cloth or coverings used to protect the surface.
   • Dispose of the old handle responsibly.

By following these steps, you can install the Outer Door Handle Assembly with ease, saving both time and costs. Enjoy your newly enhanced vehicle appearance and smoother door operation!