Product Installation Instructions for 5-Pack Replacement Ink Cartridges PGI-580 CLI-581 Compatible with TR7550 TR8550 TS6151 TS6150 Printers

Tools Required:

1. New Ink Cartridges: Ensure you have the PGI-580 and CLI-581 cartridges ready for installation.
2. Soft Cloth or Paper Towel: To clean any excess ink or dust from the printer.
3. Scissors (if needed): To carefully open the packaging of the cartridges without damaging them.

Installation Steps:

1. Preparation:

   • Turn on your printer and ensure it is in a ready state.
   • Open the printer cover to access the cartridge compartment. This will automatically move the cartridge holder to the center.

2. Remove Old Cartridges:

   • Locate the old cartridges that need replacement.
   • Gently press down on each cartridge’s release tab to unlock, and carefully pull it out.

3. Clean the Area:

   • Use a soft cloth or paper towel to clean any dust or ink residue in the cartridge compartment.

4. Install New Cartridges:

   • Take the new PGI-580 or CLI-581 cartridge out of its packaging.
   • Remove any protective seals or tape carefully, ensuring not to touch the ink nozzles or chip.
   • Align the cartridge with the corresponding slot (black for PGI-580 and color for CLI-581).
   • Push down firmly until you hear a click, indicating the cartridge is securely in place.

5. Repeat Installation:

   • Repeat the previous step for all cartridges that need to be replaced.

6. Close the Printer:

   • Once all cartridges are installed, close the printer cover securely.

7. Print a Test Page:

   • Print a test page to ensure that the cartridges are installed correctly and functioning properly.

Final Tips:

• Always ensure cartridges are compatible with your printer model before installation.
• Store unused cartridges in a cool, dry place to extend their shelf life.
• If you experience any issues, refer to the printer manual for troubleshooting tips.