Product Installation Instructions for Carburetor Compatible with S MS270 MS280

Preparation:

Before starting the installation of the carburetor, please ensure that you have the following tools ready:

1. Screwdriver - A flathead or Phillips screwdriver, depending on the screws used in your device.
2. Wrench or Socket Set - To remove any nuts or bolts securing the carburetor.
3. Pliers - For gripping or twisting any connectors or fuel lines.
4. Clean Cloth - To wipe any spills and keep your workspace tidy.
5. Safety Goggles - To protect your eyes from debris during the installation process.
6. Gloves - To keep your hands clean and protected.

Installation Steps:

1. Preparation: Ensure the outdoor power equipment is turned off and disconnected from any power source or fuel supply.

2. Remove the Old Carburetor:

   • Use the screwdriver or wrench to remove any screws or bolts securing the old carburetor to the engine.
   • Carefully detach any fuel lines connected to the carburetor using pliers.
   • Take note of the configuration of the connections for easier installation of the new carburetor.

3. Install the New Carburetor:

   • Place the new carburetor in position, aligning it with the engine mounting points.
   • Reattach the fuel lines as noted during the removal process, ensuring a secure fit.
   • Secure the carburetor with screws or bolts previously removed.

4. Final Checks:

   • Double-check all connections to ensure they are tight and properly installed.
   • Clean any spills with a cloth and ensure the workspace is safe.

5. Testing:

   • Reconnect the power or fuel supply to the equipment and start the engine.
   • Monitor for any leaks and ensure that the engine runs smoothly.

Note: If you encounter any issues during installation, refer to the equipment manual or seek professional assistance.

Enjoy enhanced performance with your new carburetor replacement!