Product Installation Instructions for Motorcycle Oil Filter Cleaner Compatible with C600 SPORT, 647, C650GT, F650GS, F700GS, F750GS, F800 Series, and F850GS Models

Tools Required:

1. Oil Filter Wrench: To easily remove the old oil filter.
2. Socket Set: To remove bolts as necessary, especially if any components block access to the oil filter.
3. Funnel: To pour the oil cleaner into the engine without spills.
4. Drain Pan: To collect any oil that may spill during the oil filter change.
5. Rags or Shop Towels: For cleaning up any spills and wiping surfaces as needed.
6. Gloves: To protect your hands from oil and grime.
7. Safety Glasses: For eye protection during the installation process.

Installation Steps:

1. Prepare the Motorcycle: Ensure the motorcycle is on a level surface and the engine is cool.

2. Remove the Old Oil Filter: Use the oil filter wrench to loosen and remove the old oil filter. Be cautious as some residual oil may still be present.

3. Drain Old Oil: Place the drain pan underneath and remove the oil drain plug if necessary to allow old oil to drain out completely.

4. Install the Cleaner: Using the funnel, pour the Motorcycle Oil Filter Cleaner into the engine according to the product instructions.

5. Reinstall the Oil Filter: Take the new oil filter, apply a small amount of fresh oil to the rubber gasket, and install it securely following the manufacturer's instructions.

6. Refill Engine Oil: Replace the drain plug if removed, and fill the engine with appropriate fresh oil as specified in your motorcycle's manual.

7. Start the Engine: Allow the engine to run for a few minutes to circulate the oil and cleaner.

8. Check for Leaks: Inspect the area around the oil filter and drain plug to ensure there are no leaks.

9. Clean Up: Dispose of old oil and filter properly and clean up any spills.

Conclusion: Following these steps will ensure that your motorcycle remains in optimal condition while effectively utilizing the Motorcycle Oil Filter Cleaner. Enjoy a smooth and efficient ride!