Product Installation Instructions for Air Filter Compatible with 38cc 3800 Chainsaw

Introduction:
This air filter is designed for use with 38cc and 3800 models of chainsaws. It ensures optimal filtering performance and extends the lifespan of your chainsaw. Follow these instructions for a hassle-free installation.

Tools Needed:

1. Phillips screwdriver
2. Flathead screwdriver (optional, for prying)
3. Clean cloth or rag (for cleaning surfaces if necessary)

Installation Steps:

1. Prepare Your Chainsaw:

   • Ensure the chainsaw is powered off and disconnected from any power source.
   • If applicable, allow the chainsaw to cool down if it has been used recently.

2. Locate the Air Filter Housing:

   • Identify the area where the air filter is housed. This is typically located near the engine cover.

3. Remove the Existing Air Filter:

   • Use a Phillips screwdriver to remove the screws securing the air filter cover.
   • Carefully lift the cover to expose the existing air filter.
   • Gently pull out the old air filter from its compartment. If there is debris, use a clean cloth to wipe the area if necessary.

4. Install the New Air Filter:

   • Take your new air filter and ensure it aligns correctly with the housing.
   • Insert the new air filter into the compartment, making sure it fits snugly.

5. Reattach the Air Filter Cover:

   • Place the air filter cover back onto its housing.
   • Secure it with the screws you previously removed, ensuring it is tightly fastened.

6. Final Check:

   • Inspect the installation to ensure everything is in place.
   • Make sure there are no loose screws and the air filter is fitted properly.

7. Test Your Chainsaw:

   • Start your chainsaw and ensure it operates smoothly. Listen for any irregular sounds that may indicate a problem with the installation.

Maintenance Tips:

• Regularly check and replace the air filter to maintain optimal performance and reduce repair costs.
• Keep your chainsaw clean and free from debris to prolong its lifespan.

Conclusion:
By following these instructions, you can easily replace the air filter in your 38cc or 3800 chainsaw. Enjoy improved performance and efficiency!