Product Installation Instructions for Replacement Camera Lens Ring with Glass for Drone Model D Mavic Pro

Tools Required:

1. Phillips Head Screwdriver
2. Tweezers (optional, for delicate handling)
3. Soft Cloth or Microfiber Cloth
4. Small Container (to hold screws)
5. Instruction Manual (for reference)

Installation Steps:

1. Preparation:

   • Ensure your drone is powered off and the battery is removed before starting the installation.
   • Work in a well-lit area and use a soft cloth to place your drone on to prevent scratches.

2. Remove the Old Lens Assembly:

   • Using a Phillips screw headdriver, carefully remove the screws securing the old lens ring and glass.
   • Place the screws in a small container to avoid losing them.
   • Gently detach the old lens ring and glass from the drone body. Use tweezers if necessary for precise handling.

3. Clean the Area:

   • Use a soft cloth or microfiber cloth to clean the surface where the new lens will be installed. Ensure there is no debris or dust.

4. Install the New Lens Ring and Glass:

   • Align the new lens ring and glass with the mounting area on the drone.
   • Press gently but firmly to secure it in place.
   • Carefully replace the screws you previously removed, ensuring they are tightened but not overtightened to avoid damage.

5. Final Checks:

   • Inspect the installation to ensure everything is aligned and secure.
   • Replace the drone battery and conduct a brief test flight to ensure the lens functions correctly.

6. Enjoy Enhanced Performance:

   • With your new lens ring and glass installed, enjoy the improved clarity and color in your aerial photography!

Note:
Always refer to your drone’s instruction manual for specific assembly details and safety precautions. If you’re uncertain about any step, seek assistance to avoid damage to your drone.