Gexpress Is a Startup Dedicated to You. Shop With Confidence—Refunds Are Easy Through !
Installation Instructions for Fuel Hose Oil Pump Out Pipe Set for 25cc 2 Stroke Small Chainsaw
Compatibility:
This fuel pump hose set is compatible with various models of 25cc 2-stroke small chainsaws, ensuring broad adaptability.
Tools Required:
Before you begin the installation, please gather the following tools:
- Phillips screwdriver
- Flathead screwdriver
-Pliers - Utility knife (if necessary)
-Cleaning cloth
Installation Steps:
-
Preparation:
Ensure that your chainsaw is turned off and cooled down before beginning the installation. Disconnect the spark plug wire for safety. -
Remove the Old Hose:
Use the pliers to gently detach the old oil pump hoses from their connection points. If needed, use a utility knife to cut any stubborn hoses. -
Clean the Connection Points:
Use a cleaning cloth to wipe down the connection points where the new hoses will be attached. This helps to ensure a tight seal and prevents contamination. -
Install the New Hose Set:
- Take the new fuel hose out of the kit.
- Connect the hoses to the appropriate ports on the chainsaw, ensuring the correct orientation as per the provided installation guide.
- Press the hoses firmly onto the connection points to create a secure fit.
-
Secure the Hoses:
If your model uses clamps, make sure to fasten them securely around the hoses to prevent any leaks. -
Reconnect the Spark Plug:
Once the installation is complete, reconnect the spark plug wire. -
Testing:
Fill the fuel tank and start the chainsaw, observing for any fuel leaks or irregularities in performance.
Maintenance Tips:
With this hose set’s durable materials and design, routine checks and maintenance are simplified to ensure your chainsaw continues to operate smoothly.
By following these steps, you can efficiently install the Fuel Hose Oil Pump Out Pipe Set, enhancing the performance of your chainsaw for all your cutting needs.
