Product Installation Instructions for Inkjet Print Head Replacement

Compatible Models:
iX4000, iX5000, iP3100, iP3000, 560i, 850i, MP700, MP710, MP730, MP740
Replacement Part Number: QY6-0042

Tools Required:

1. Phillips screwdriver (if applicable)
2. Soft, lint-free cloth
3. Isopropyl alcohol (for cleaning)
4. Tweezers (optional, for handling small parts)
5. Access to a clean workspace

Installation Steps:

1. Preparation:

   • Ensure the printer is turned off and unplugged from the power source.
   • Clear the workspace to have ample room for the installation process.

2. Remove Old Print Head:

   • Open the printer cover to access the print head assembly.
   • If necessary, use a Phillips screwdriver to remove any screws securing the print head.
   • Carefully lift the old print head out of its slot. Use tweezers if needed.

3. Clean the Area:

   • Use a soft, lint-free cloth dampened with isopropyl alcohol to clean the print head compartment. This ensures optimal performance of the new print head.

4. Install the New Print Head:

   • Take the new print head out of its packaging. Avoid touching the nozzles to prevent contamination.
   • Align the new print head with the slot and gently insert it until securely in place.
   • If screws were removed, re-secure them to ensure the print head is firmly attached.

5. Final Checks:

   • Close the printer cover securely.
   • Plug the printer back into the power source and turn it on.
   • Run a test print to ensure the new print head is functioning correctly and producing high-quality images.

6. Disposal:

   • Dispose of the old print head according to local regulations regarding electronic waste.

By following these steps, you can easily replace your inkjet print head, enhancing your printing performance with minimal effort. Enjoy clear and vibrant prints for all your home and office needs!