Installation Instructions for Throttle Trigger Arm Choke Rod Switch Shaft Torsion Spring Kit Compatible with MS170 MS180 Chainsaw Models 11301821000

Introduction:
This throttle valve accessory is specifically designed for the MS170 and MS180 chainsaw models. It ensures perfect compatibility and easy replacement to enhance the overall performance of your chainsaw.

Tools Required:
To successfully install the throttle trigger arm choke rod switch shaft torsion spring kit, you will need the following tools:

1. Screwdriver (Flathead and Phillips)
2. Pliers
   3.Wrench set
3. Needle-nose pliers (optional)
4. Work gloves (recommended for safety)

Installation Steps:

1. Preparation:

   • Ensure your chainsaw is turned off and disconnected from any power source.
   • Put on work gloves for protection.

2. Remove the Existing Parts:

   • Use the screwdriver to remove any screws securing the current throttle trigger arm and choke rod.
   • Carefully detach the old components from the chainsaw.

3. Inspect the Components:

   • Check the new parts for damage or defects before installation.

4. Install the New Throttle Trigger Arm:

   • Position the new throttle trigger arm in place, aligning it with the corresponding holes.
   • Secure it using the screws you removed earlier.

5. Install the Choke Rod:

   • Insert the new choke rod into the designated area.
   • Ensure it connects properly to the throttle trigger mechanism.

6. Attach the Torsion Spring:

   • Follow the provided diagram or instructions to attach the torsion spring to the appropriate areas.
   • Ensure the spring is securely installed to allow for the correct tension during operation.

7. Final Checks:

   • Double-check all components to ensure they are properly installed and secured.
   • Ensure there are no loose parts or screws.

8. Test the Chainsaw:

   • Reconnect your chainsaw to power and test the throttle and choke functionality.
   • Ensure everything operates smoothly and efficiently.

Conclusion:
Congratulations! You have successfully installed the throttle trigger arm choke rod switch shaft torsion spring kit on your MS170 or MS180 chainsaw. Enjoy improved performance and efficiency in your chainsaw operations. If you encounter any issues, consult the user manual or seek professional assistance.