Product Installation Instructions: 50cc 2-Stroke Scooter Engine Oil Pump Assembly

Tools Required:

1. Socket Wrench Set
2. Screwdriver Set (Flathead and Phillips)
3. Pliers
4. Torque Wrench
   5.Clean Cloth or Rag
5. Oil Pan or Container (for any residual oil)
6. Safety Gloves
7. Safety Goggles

Installation Steps:

1. Preparation:

   • Ensure that the scooter is turned off and parked on a stable surface.
   • Wear safety gloves and goggles to protect yourself during the process.

2. Remove the Old Oil Pump:

   • Start by locating the oil pump assembly on your scooter.
   • Use the appropriate screwdriver or socket wrench to remove the screws or bolts securing the old oil pump.
   • Carefully disconnect the oil lines from the pump, ensuring to catch any residual oil in your oil pan or container.

3. Clean the Area:

   • Use a clean cloth or rag to wipe any spilled oil or dirt around the oil pump area to prevent contamination.

4. Install the New Oil Pump:

   • Take the new oil pump assembly and align it with the mounting holes.
   • Secure the pump in place using the screws or bolts you removed earlier. Ensure all connections are tight using the torque wrench for proper specifications.

5. Reconnect Oil Lines:

   • Carefully reconnect the oil lines to the new oil pump, ensuring that they are seated correctly to prevent any leaks.

6. Check for Leaks:

   • Before turning on the scooter, inspect all connections and ensure there are no visible leaks around the oil pump and lines.

7. Test the Installation:

   • Start the scooter and allow it to run for a few minutes.
   • Monitor the oil pump for proper operation and watch for any signs of leakage.

8. Final Inspection:

   • After running the engine, check once more for leaks and ensure all components are secure.

Conclusion:
Your new 50cc 2-Stroke Scooter Engine Oil Pump Assembly is now installed and ready to improve your scooter's performance. Enjoy your ride!