Product Installation Instructions for Universal CVT Drive Belt 18.5 28

Tools Required:

1. Socket Wrench Set: For removing and tightening bolts.

2. Screwdriver Set: Both flathead and Phillips screwdrivers may be required.

3. Pliers: For gripping and pulling components.

4. Torque Wrench: To ensure proper tightening of bolts, if specified by the manufacturer.

5. Gloves: To protect your hands during the installation process.

6. Safety Goggles: To protect your eyes from debris.

7. Shop Manual or Installation Guide: Recommended for specific instructions related to your vehicle model.

Installation Steps:

1. Preparation:

   • Ensure the vehicle is on a flat surface.
   • Disconnect the battery to prevent any electrical issues.

2. Remove the Old Belt:

   • Locate the CVT cover and use the appropriate screwdriver to remove it.
   • Detach the old drive belt carefully.

3. Install the New Belt:

   • Position the new Universal CVT Drive Belt in the same orientation as the old belt.
   • Ensure it fits snugly in place, with no twists.

4. Reassemble the Components:

   • Reattach the CVT cover using the screws removed earlier.
   • Make sure all components are secure and correctly aligned.

5. Reconnect the Battery:

   • Reconnect the battery and double-check all connections.

6. Test the Installation:

   • Start the engine and check for any unusual noises or issues.
   • Test the vehicle's acceleration to ensure everything is functioning correctly.

Safety Reminder:
Always ensure the engine is cool before starting any maintenance work. If you are unsure about any step, please consult a professional mechanic for assistance.

By following these instructions, you will be able to successfully install your new Universal CVT Drive Belt and enjoy enhanced performance from your vehicle.