Product Installation Instructions for Ignition Starter Switch and Key Set Compatible with M 725-0267A Ride On Mower Model 0945-4

Tools Required:

1. Flathead screwdriver
2. Phillips screwdriver
3. Pliers
4. Wire stripper (if needed)
5. Safety gloves
6. Safety goggles

Installation Steps:

1. Safety First:

   • Ensure the mower is turned off and disconnected from any power source.
   • Wear safety gloves and goggles for protection during installation.

2. Access the Ignition Switch:

   • Locate the ignition switch area on your ride-on mower. This is usually found on the dashboard or control panel.
   • Use a flathead screwdriver to gently pry off any cover that may be hiding the ignition switch.

3. Remove the Old Ignition Switch:

   • Identify the screws or fasteners holding the old ignition switch in place.
   • Use a Phillips screwdriver to remove these screws and carefully take out the old ignition switch.
   • If there are any wires connected, make sure to take note of their positions for reinstallation.

4. Connect the New Ignition Switch:

   • Take the new ignition switch and connect it to the existing wiring harness.
   • Ensure that you connect the wires according to the original configuration. You may need to use wire strippers if any wires need to be re-stripped for a secure connection.

5. Secure the New Switch:

   • Once connected, secure the new ignition switch in place using the screws or fasteners you removed earlier.
   • Ensure the five-legged design fits snugly and provides a stable connection.

6. Test the New Ignition Switch:

   • Before reassembling any covers, reconnect the power source and turn the ignition key to test the functionality of the new ignition switch.
   • Ensure that the switch operates smoothly and the mower starts without issues.

7. Reassemble and Close Up:

   • If everything works correctly, replace any covers or panels that were removed during the installation process.
   • Make sure everything is secured and there are no loose parts.

8. Final Check:

   • Do a final inspection to ensure that all tools are removed from the area and that the workstation is clean.

Your new Ignition Starter Switch and Key Set is now installed and ready to use! Enjoy a seamless mowing experience with your compatible M 725-0267A Ride On Mower.