Product Installation Instructions for Drone Accessories Yaw Arm with Dual Motors and Camera Upper Bracket Replacement Part for Mavic Air 2S

Overview:
This installation guide will assist you in replacing the Yaw Arm and Camera Upper Bracket on your Mavic Air 2S. Follow the steps carefully to ensure proper installation.

Tools Required:

1. Screwdriver Set (Phillips and Flathead)
2. Tweezers (for handling small parts)
3. Plastic Pry Tool (to avoid scratching the drone body)
4. Magnetic Tray or Small Container (to hold screws and small components)
5. Soft Cloth or Mat (to protect the drone during installation)

Installation Steps:

1. Preparation:

   • Ensure the drone is powered off and remove the battery.
   • Find a clean, flat surface to work on.
   • Lay down the soft cloth or mat to protect your drone from scratches.

2. Remove Existing Yaw Arm and Camera Bracket:

   • Using the appropriate screwdriver, carefully remove the screws securing the old Yaw Arm and Camera Upper Bracket.
   • Use a plastic pry tool to gently detach the components if they are stuck.

3. Install the New Yaw Arm:

   • Align the new Yaw Arm with the mounting points on the drone.
   • Secure it in place by tightening the screws with the screwdriver. Ensure they are fastened snugly but avoid over-tightening.

4. Attach the Camera Upper Bracket:

   • Position the Camera Upper Bracket onto the installed Yaw Arm.
   • Secure it with the corresponding screws, making sure it is firmly attached.

5. Check Dual Motors:

   • Before reassembling, check that both dual motors on the Yaw Arm are properly connected and free from obstructions.

6. Final Assembly:

   • Once everything is in place, double-check all screws for tightness.
   • Reinstall the battery and power on the drone to test for functionality.

7. Test Flight:

   • Conduct a test flight in a safe environment to ensure stability and control.

Tips:

• Follow the installation guide closely to avoid damaging any components.
• If you encounter resistance during assembly, double-check the alignment before proceeding.
• Keep all small parts organized to make reassembly easier.

Conclusion:
With the right tools and steps, replacing the Yaw Arm and Camera Upper Bracket on your Mavic Air 2S can be a straightforward process. Enjoy enhanced flight performance and better photography with your new accessories!