Installation Instructions for Toner Powder Compatible with C227 C287 C7528 Color Copier

Tools Required:

1. Soft, lint-free cloth
2. Disposable gloves (optional, to keep hands clean)
3. Phillips screwdriver (if necessary for access to the toner compartment)

Installation Steps:

1. Preparation:

   • Ensure your color copier is turned off and unplugged for safety.
   • Gather all necessary tools and materials on a clean, dry surface.

2. Access the Toner Compartment:

   • Locate the toner compartment on your copier.
   • If your copier requires it, use the Phillips screwdriver to remove any screws securing the compartment cover.

3. Remove Old Toner Cartridges (if applicable):

   • Carefully take out any existing toner cartridges. Be cautious to avoid spilling toner powder.
   • Place the old toner cartridges in a sealed bag for proper disposal.

4. Prepare the New Toner Cartridge:

   • Take the compatible toner powder from its packaging.
   • Gently shake the toner cartridge to distribute the powder evenly. This step is crucial for optimal printing quality.

5. Install the New Toner Cartridge:

   • Insert the new toner cartridge into the designated slot in the toner compartment.
   • Ensure it is securely locked in place (you should hear a click).

6. Close the Toner Compartment:

   • Replace the compartment cover and secure it with screws if needed.

7. Clean Up:

   • Use the soft cloth to wipe any toner dust from your hands and the surrounding area.
   • Dispose of any old toner cartridges and packaging materials responsibly.

8. Power On the Copier:

   • Plug in the copier and turn it on.
   • Run a test print to ensure the new toner is properly installed and functioning correctly.

Note:
If you encounter any issues during installation, refer to the copier’s manual for additional guidance. Always remember to follow safety guidelines when handling toner powder.