Product Installation Instructions for Fuel Tank Cap Compatible with Inverter Generators

Model Compatibility:
This fuel tank cap is specifically designed for IG770, IG1000, IG2000, and IG2600 models.

Tools Needed:

• No specialized tools are required
• A flathead screwdriver (optional, for prying off the old cap if needed)
• Clean cloth (for wiping any spills)

Installation Steps:

1. Preparation:

   • Before starting, ensure that the generator is turned off and has cooled down completely.
   • Clean the area around the existing fuel cap to prevent any debris from entering the fuel tank.

2. Removing the Old Fuel Cap:

   • If applicable, twist the old fuel cap counter-clockwise to remove it.
   • If the cap is stuck, use a flathead screwdriver to gently pry it off without damaging the tank.

3. Inspecting the Fuel Tank Opening:

   • Check the fuel tank opening for any debris or damage. Clean the area with a clean cloth if necessary.

4. Installing the New Fuel Cap:
   -Align the new fuel cap with the opening of the fuel tank.

   • Twist the fuel cap clockwise until it is securely fastened.

5. Final Check:

   • Ensure the cap is tight and properly sealed to avoid any fuel leakage.
   • Do a quick inspection of the surrounding area to ensure everything is in order.

Usage Tips:

• Regularly check the fuel cap for wear and tear.
• Always ensure the fuel tank is sealed properly during operation to maintain generator efficiency.

By following these simple steps, you can easily install the fuel tank cap and ensure your inverter generator operates smoothly and efficiently.