Product Installation Instructions for Recoil Pull Start Starter

Compatibility:
This recoil pull start starter is compatible with various trimmer and lawn mower models, ensuring a perfect match with parts 4140 190 4009.

Installation Overview:
Follow these steps to replace your old pull start starter with the new Recoil Pull Start Starter. This installation is simple and does not require professional tools.

Tools Required:

• Phillips screwdriver
• Flathead screwdriver
  -Pliers
• Safety gloves
  -Cleaning cloth

Installation Steps:

1. Preparation:

   • Ensure the lawn mower or trimmer is turned off and disconnected from any power source.
   • Wear safety gloves to protect your hands during the installation.

2. Remove the Old Starter:

   • Locate the screws securing the old pull start starter. Use the Phillips screwdriver to remove these screws carefully.
   • Gently detach the old starter from the equipment. You may need the flathead screwdriver to pry it loose if it’s stuck.

3. Clean the Area:

   • Use the cleaning cloth to wipe down the area where the new starter will be installed. This ensures a clean surface for the new part.

4. Install the New Starter:

   • Position the new Recoil Pull Start Starter in place.
   • Align the holes and secure it with the screws you removed earlier, using the Phillips screwdriver to tighten them.

5. Test the Installation:

   • Once installed, gently pull the starter cord to ensure it moves smoothly.
   • Reconnect your equipment to the power source and test the starter to confirm proper functionality.

Final Check:
After installation, ensure all screws are secure and the starter is functioning correctly. This new starter should effectively resolve any previous issues with your old starter and enhance your equipment's efficiency.

By following these steps, you can easily replace your pull start starter and get back to your lawn care tasks quickly. Enjoy the enhanced performance!