Product Installation Instructions for Ignition Coil for 49.6CC T320 SV/PHV-100 Gas Engine Replacement

Introduction:

Thank you for purchasing the Ignition Coil compatible with the 49.6CC T320 SV/PHV-100 Gas Engine. This installation guide will help you replace the ignition coil with ease, enhancing your engine's performance and efficiency.

Tools Required:

Before starting the installation process, please ensure you have the following tools on hand:

1. Socket wrench set
2. Screwdriver set (Phillips and flathead)
3. Pliers
4. Torque wrench
5. Wire cutter/stripper
6. Safety gloves
7. Safety goggles

Installation Steps:

1. Safety First:

   • Turn off the engine and disconnect the spark plug for safety.
   • Wear safety gloves and goggles to protect yourself during the installation.

2. Locate the Ignition Coil:

   • Remove the engine cover, if necessary, to access the ignition coil.
   • Identify the old ignition coil.

3. Remove the Old Ignition Coil:

   • Use the socket wrench to unscrew the bolts securing the ignition coil to the engine.
   • Carefully disconnect the wire harness from the ignition coil using the pliers.

4. Install the New Ignition Coil:

   • Position the new ignition coil in place and secure it using the bolts you removed earlier.
   • Reconnect the wire harness to the terminals on the new ignition coil.

5. Reassemble the Engine:

   • Replace the engine cover, ensuring all screws and fasteners are tightened securely.

6. Reconnect the Spark Plug:

   • Reattach the spark plug to the ignition system.

7. Test the Engine:

   • Start the engine and allow it to run for a few minutes to ensure everything is functioning correctly.
   • Check for any unusual sounds or vibrations.

Conclusion:
Following these steps will help you successfully replace your ignition coil. Enjoy improved engine performance and efficiency! If you experience any issues or have questions, consult a professional mechanic for assistance.