Installation Instructions for 4-Piece Aluminum Wheel and Low Profile Tire Set

Tools Required:

1. Screwdriver Set - For removing and fastening screws on the chassis.
2. Hex Wrench - To loosen and tighten the wheel nuts (if applicable).
3. Pliers - For better grip and easier handling of small parts.
4. Cutting Tool - If trimming is required for fitting tires (optional).
5. Clean Cloth - To clean the area around the wheel hub before installation.

Installation Steps:

1. Prepare the Work Area:

   • Clear a flat surface and gather all required tools.
   • Ensure your RC car is turned off to avoid any accidental movements.

2. Remove Existing Wheels:

   • Use the screwdriver to remove any screws securing the current wheels.
   • If necessary, use the hex wrench to loosen the wheel nuts.
   • Gently pull the wheels off the hub, taking care not to damage any surrounding parts.

3. Check Compatibility:

   • Ensure that the new aluminum wheels fit your 1/32 scale mini 4WD RC car.
   • Confirm that the wheel axles are properly sized for the new wheels.

4. Install New Wheels:
   -Align the aluminum wheels with the wheel hub.

   • Push the wheels onto the hub securely.
   • If applicable, use the hex wrench to tighten the wheel nuts.

5. Attach Low Profile Tires:

   • Carefully align the low profile tires with the aluminum wheels.
   • Press them into place until you hear a gentle click, indicating they are securely fitted.

6. Final Check:

   • Inspect all installations to ensure everything is properly secured.
   • Rotate each wheel by hand to check for any resistance or friction.

7. Clean Up:

   • Put away all tools and ensure no small parts are left on the workspace.
   • Wipe down the area around the wheel hub with a clean cloth.

Your 4-Piece Aluminum Wheel and Low Profile Tire Set is now successfully installed! Enjoy enhanced performance and the stylish look on your RC racing car.