Installation Instructions for 148MM Bright 36 LED Light Bar

Product Overview

This 148MM Bright 36 LED Light Bar is designed for 1/10 scale crawler vehicles, compatible with Axial 90046 and other similar models. It offers strong brightness, a wide illumination range, and is built for durability in outdoor conditions.

Tools Required

Before starting the installation process, please gather the following tools:

1. Small Phillips screwdriver
2. Double-sided tape or mounting adhesive
3. Wires and connectors (if not included)
4. Heat shrink tubing (for securing connections)
5. Wire cutters/strippers
6. Soldering iron and solder (optional for permanent connections)
7. Electrical tape (for insulation)
8. Ruler or measuring tape (for accurate placement)

Installation Steps

1. Preparation:

   • Ensure the crawler vehicle is turned off and the battery is removed.
   • Clean the area on the vehicle where the LED light bar will be mounted.

2. Positioning the Light Bar:

   • Use your ruler to measure and find the ideal position for the LED light bar on the crawler.
   • Make sure it is securely placed and does not obstruct any moving parts.

3. Mounting the Light Bar:

   • If using double-sided tape, cut to size and stick it to the back of the light bar.
   • Firmly press the light bar onto the designated area on the crawler vehicle.

4. Wiring Connection:

   • Identify the power source on your crawler vehicle.
   • If the LED light bar comes with wires, connect them to the power source using connectors.
   • If needed, strip the ends of the wires and solder them for a secure connection. Use heat shrink tubing and electrical tape to insulate the connections.

5. Final Check:

   • Ensure all connections are secure and there are no exposed wires.
   • Reattach the battery to the crawler vehicle.

6. Testing:

   • Turn on the vehicle to test the light bar. The LED should illuminate brightly; if not, check the connections again.

Note:

Make sure to follow safety guidelines while using tools and handling electrical components. Enjoy your enhanced visibility with the LED Light Bar during your crawling adventures!

###Conclusion
With this installation guide, you should be able to set up your 148MM Bright 36 LED Light Bar quickly and efficiently. Happy crawling!