Product Installation Instructions for Fuel Tank Caps for 50CC Dirt Bikes Compatible with PW50 & 50PY

Tools Required:

• Flathead screwdriver (if needed for adjustments)
  -Clean cloth for surface preparation
• Safety gloves (optional, for better grip and protection)

Installation Steps:

1. Preparation:

   • Ensure the dirt bike is turned off and parked on a stable surface.
   • Allow the fuel tank to cool down if the bike has been running recently.

2. Remove the Old Fuel Tank Cap:

   • Carefully unscrew the old fuel cap by turning it counterclockwise.
   • If the cap is stuck, use a flathead screwdriver to gently pry it up without damaging the tank.

3. Clean the Fuel Tank Opening:

   • Use a clean cloth to wipe around the fuel tank opening to remove any debris or old fuel residues. This ensures a proper seal for the new cap.

4. Install the New Fuel Tank Cap:
   -Align the new fuel tank cap with the opening.

   • Screw it on by turning it clockwise until it is securely in place. Do not overtighten to avoid damaging the threads.

5. Check the Seal:

   • Ensure that the cap is properly sealed and fits snugly to prevent any fuel leaks.
   • Give the cap a gentle twist to confirm it is locked in position.

6. Final Inspection:

   • Double-check the surrounding area for any signs of fuel leakage.
   • Start the bike and observe to ensure everything is functioning correctly.

Safety Tips:

• Always handle fuel with caution and in a well-ventilated area.
• Store any tools or parts safely to avoid accidents.

By following these steps, you will successfully install your new fuel tank cap, ensuring your 50CC dirt bike remains in optimal working condition.