Product Installation Instructions for Projector Lamp Compatible with Various Models

Compatible Models:

• PT-EW530E
• PT-EW630E
• PT-EW630EL
• PT-EX500E
• PT-EZ570EL
• PT-EW530
  -PT-EX600
  -PT-EX500
  -PT-EX600
  -ET-LAE200

Installation Guide:

Tools Required:

1. Screwdriver Set: A Philips screwdriver is necessary for unscrewing the lamp cover.
2. Soft Cloth: To prevent scratches on the projector, use a soft cloth to rest the projector on during installation.
3. Dust Mask: Recommended to keep dust and particles away while replacing the lamp.
4. Anti-Static Wrist Strap (optional): To prevent static electricity from damaging the internal components of the projector.

Step-by-Step Installation:

1. Preparation:

   • Ensure the projector is turned off and unplugged from the power source. Allow it to cool down for at least 30 minutes if it was previously in use.

2. Remove the Lamp Cover:

   • Use the Philips screwdriver to unscrew and remove the lamp cover. Keep the screws in a safe place to avoid losing them.

3. Take Out the Old Lamp:

   • Gently pull the handle to release and remove the old lamp from its compartment. Be careful not to touch the glass part of the lamp with your fingers, as oils from your skin can damage it.

4. Insert the New Lamp:

   • Take the new lamp out of its packaging. Align it correctly into the lamp compartment and push it in gently until it is securely in place.

5. Replace the Lamp Cover:

   • Once the new lamp is installed, put the lamp cover back in place and secure it with the screws you removed earlier.

6. Reconnect the Projector:

   • Plug the projector back into the power outlet. Ensure all connections are secure.

7. Power On the Projector:

   • Turn on the projector to ensure the new lamp is functioning correctly. Check for any error messages on the display.

Care Tips:

• Regularly check the lamp status in the projector menu and replace it as needed based on usage.
• Store any unused lamps in a cool, dry place to maintain their lifespan.

By following these simple steps, you can easily replace your projector lamp and enhance your viewing experience. Enjoy your improved projection quality!