Installation Instructions for Carburetor Compatible with CT 70 Models (1984-1994)

Tools Required:

To ensure a smooth installation process, please prepare the following tools:

1. Screwdriver Set (Flathead and Phillips)
2. Wrench Set (Including 10mm and 12mm wrenches)
3. Pliers
4. Socket Set
5. Fuel Line Clamps (optional, for preventing fuel leakage)
6. Rags or Shop Towels (for cleanup)
7. Safety Goggles (to protect your eyes during installation)

Installation Steps:

1. Preparation:

   • Begin by disconnecting the negative battery terminal to ensure safety while working on the bike.
   • Turn off the fuel shut-off valve, if applicable.

2. Remove the Old Carburetor:

   • Use a wrench to loosen and remove the screws/nuts securing the old carburetor to the engine.
   • Detach the fuel line and vacuum hoses from the old carburetor.
   • Carefully remove the old carburetor from the mounting area.

3. Install the New Carburetor:

   • Position the new carburetor in place, aligning it with the mounting points.
   • Reattach the fuel line and any vacuum hoses, ensuring a snug fit to prevent leaks.
   • Securely fasten the carburetor using the screws/nuts removed earlier.

4. Recheck Connections:

   • Double-check that all hoses and clamps are connected properly and that there are no leaks.
   • Reinstall the air filter if it was removed during the process.

5. Final Steps:

   • Reconnect the negative battery terminal.
   • Turn on the fuel shut-off valve and check for any leaks around the carburetor and fuel line.
   • Start the engine and allow it to warm up. Ensure it is running smoothly, making adjustments as necessary.

##Conclusion:
Your new carburetor is now installed! Enjoy improved performance and smoother rides with your CT 70. If you encounter any issues, refer to your vehicle’s manual or consult a professional mechanic for assistance.